Product Details
Olzvel One Plus Nebulizer Compressor provides compressed air for aerosol therapy. Designed with a unique Nebulizer cup technology, it ensures most efficient Aerosol delivery. It converts the medication into an aerosol mist that penetrates through your lungs and is ideal for treatment of respiratory disorders such as asthma, allergies, and bronchitis. It is comfortable to use and is suitable for all age groups. It is ISO certified reticulated filter for safest air filtration.
Use
Olzvel One Plus Nebulizer Compressor provides compressed air for aerosol therapy.
Salient Features:
Directions For Use
Clean and disinfect nebulizer cup and accessories before use. Remove the nebulizer cup, by turning it counter-clockwise until it stops and lifts up. Add the correct amount of prescribed medication to the nebulizer cup. Put the inhalation top back on the Nebulizer cup, close the cap. Press one end of the air tube firmly into the air tube connector located on the top of the compressor unit and the other end into the bottom air tube connector of nebulizer cup. Hold the air intake near the nose. If using an optional mask, install mask on the face. If using a mouthpiece, hold the mouthpiece in the mouth. Locate the power switch on the front of the unit, and switch to the “I” position. Inhale the liquid medication mist. After use clean and sterilize the tubing and accessories.
Safety Information:
Use
Olzvel One Plus Nebulizer Compressor provides compressed air for aerosol therapy.
Salient Features:
- Has a drug storage compartment
- Has a shock resistant ABS plastic body
- Has 3 airways settings
- Easy to carry and uses less space
- It has deep medication deposition and easy to operate air filter section
- Ensures Proper Ventilation for appropriate application
- Designed with accidental and damage proof ON/OFF switch
- Easy to clean and has low noise operation
- Uses less than 40W power
- Compressor Operation flow : 6L/min - 8L/min
- Compressor Pressure range : >= 18psi
- Operation Pressure rate : 7.5psi - 13psi
- Nebulizer cup capacity : 10ml (max), 2ml-6ml Recommeded
- Operating Air Flow Rate : 6L/min – 8L/min to >=18psi
Directions For Use
Clean and disinfect nebulizer cup and accessories before use. Remove the nebulizer cup, by turning it counter-clockwise until it stops and lifts up. Add the correct amount of prescribed medication to the nebulizer cup. Put the inhalation top back on the Nebulizer cup, close the cap. Press one end of the air tube firmly into the air tube connector located on the top of the compressor unit and the other end into the bottom air tube connector of nebulizer cup. Hold the air intake near the nose. If using an optional mask, install mask on the face. If using a mouthpiece, hold the mouthpiece in the mouth. Locate the power switch on the front of the unit, and switch to the “I” position. Inhale the liquid medication mist. After use clean and sterilize the tubing and accessories.
Safety Information:
- Read the instructions carefully before use
- Use under medical supervision
- Operate the nebulizer for 30 minutes then leave off for 30 minutes
- Protect from physical damage
- Do not use the device at temperatures greater than 40℃
- Store in a clean and dry place
This product is non-returnable.